Application
Industrial and agricultural measurement is about continuous duty rather than billing accuracy. The meter sits on an intake, a process line or an irrigation main and is expected to keep reading without attention. Chenshuo supplies DN50-DN200 dual-channel ultrasonic bulk meters and DN15-DN65 multi-jet mechanical meters for this range of work.
Typical sizes: DN40-DN300
The same meter is bought for different reasons depending on who is signing. These are the four roles that come up most often on this type of project.
Intake measurement that runs continuously and does not need attention between shutdowns.
Large volumes, seasonal use, and often no power or shelter at the measurement point.
A specified meter with documentation that arrives with the rest of the package.
Allocation between users, which means the meter has to be accepted as fair by the people being charged.
Four things that most often settle whether a project goes ahead with us.
The ultrasonic bulk body has no moving parts in the flow path, so there is no mechanical wear to service on an intake that runs all year.
DN50-DN200 in the dual-channel ultrasonic range. Larger sizes and other bodies are supplied on request, subject to confirmation.
Straight lengths, orientation and whether the point is sheltered all affect what will read correctly. Send the site conditions with the enquiry and we will flag anything before you order.
Certificate and test document copies are provided with the quotation.
These are the models most often specified for this application. Send us the pipe size and flow range and we will confirm which one fits.
DN50–DN200
Two ultrasonic paths from DN50 to DN200, so turbulent or disturbed flow still measures accurately on a large main.
DN15–DN65
LXS-15E ~ LXS-65E series
The lowest-cost way to meter a household — multi-jet accuracy, no power supply, and six housing options to match the budget.
This group covers several distinct jobs. Find the one closest to yours.
An intake meter is there to tell the plant what it abstracted, either for its own cost accounting or because a permit requires it. The conditions are harder than a building supply: continuous flow, larger sizes, and often a pit or an exposed position. What decides the meter is usually the range it has to hold and whether it can be read without a visit.
Irrigation runs seasonally at high volume and often at points with no power and no shelter. The measurement question is usually allocation between users rather than revenue protection, so the meter has to be one that the users accept as fair. Available sizes and bodies for this duty are confirmed per project.
Most measurement problems on industrial lines are installation problems, not meter problems. Straight lengths upstream and downstream, orientation, and whether the body is fully charged all change what the meter reads. Checking these before the meter is fitted is cheaper than diagnosing them afterwards.
Meters from this application group as they go in on real jobs.
Ultrasonic where you want no moving parts and a wide range. Mechanical where the duty is steady and the budget favours it. Send the flow range and we will confirm.
Larger sizes are supplied on request, subject to confirmation against the project.
Pipe size, expected minimum and maximum flow, installation conditions and quantity.
Contact our team for bulk pricing, project quotations and technical support.